The R/F Terminal is a low cost, easy-to-use radio frequency handheld terminal for communication with PCs and Macs (or any computer via RS-232). Data scanned or keyed is immediately transmitted to the computer. The computer sends data to the terminal screen telling the operator what next to do. No other radio frequency terminal offers as much power and ease-of-use.
|
Smallest size in industry
|
|
Greatest Distance -- 500,000 sq. ft.
|
|
Lowest entry cost -- $2,000
|
|
Easiest to implement -- no terminal programming required
|
|
All programming on host in VB, Access, C, Delphi, GW Basic, etc.
|
|
Simple read/write to Com port
|
|
80 field selectable frequencies
|
|
1-16 Terminals per Base Station
|
|
Base attaches to Com port
|
|
Approved for unlicensed operation in USA and Canada
|
|
Uses standard AA batteries
|
|
Voice prompting too!
|
|
Easy performance tuning
|
|
Supports Wand, CCD, or Laser Scanners
|
|
This is the smallest, easiest, most powerful, and least expensive R/F data collection terminal available in the industry. Operating license-free at 902MHz, it's range is typically twice that of the competition. Yet it is the smallest R/F Terminal in the industry. As you would expect from Worth Data, it is also the simplest to implement.
|
Small But Powerful
Despite the fact that it only weighs 14 ounces with batteries installed, the R/F Terminal can easily cover 500,000 square feet of open warehouse space. If you exceed your Base Station RF coverage, you can add from 1 to 16 Relay stations to extend your range.
|
Lowest Cost Available
A starter system of one terminal with a wand scanner plus a base station is only $2,055. Additional terminals with wand are only $1,215. Up to 16 terminals can be attached to one base station. For multiple terminal systems, you can cut your RF contention in half by simply adding another base station for $840. You can start small, develop your applications, then expand at a very comfortable low incremental cost. Unsurpassed performance at the lowest price-- unbeatable value.
|
|
|
T71 R/F Terminal
The T71 R/F Terminal is the flagship R/F product and costs only $1,095 without a bar code scanner. It is very durable and it weighs only 14oz with 3 AA batteries. The T71 R/F Terminal allows you to attach any of our bar code scanning devices including switch wands, CCD's, or laser scanners. Separate laser scanners are available in a selection of cost vs. reading range, from $549 for the LZ100 which scans 2 feet away to the 3200ER for $1,195 which scans 35 feet away on 100 mil retro-reflective bar codes.
RF Terminal Information Request Form
|
|
LT71 Integrated Laser R/F Terminal
These models of the R/F Terminal have a powerful, high-quality laser scanner built into the top of the case -- no cables, no additional hardware -- everything for laser scanning is built-in. Scanning is easily triggered by depressing the large green key below the screen with either the left or right thumb. It is very easy with either hand. It is so light (18 oz.) that it is easy to aim. It can read a 10 mil bar code at 15", a 40 mil bar code at 4.5 ft., and a reflective 100 mil bar code at 14 ft; this is truly a great laser scanner. Complete, the LT71 Integrated R/F Terminal is only $1,790.
RF Terminal Information Request Form
|
 |
B55 Base Station
The R/F Base Station allows attachment of up to 16 terminals at one time to communicate with it. You can select from up to 16 standard frequencies and 80 special frequencies per Base Station - yielding almost unlimited frequency coverage and limited exposure to other R/F interference. You can also attach multiple relays to a Base Station. Base Stations are $845 each complete with power supply and appropriate DB9 or DB25 cable.
RF Terminal Information Request Form
|
 |
|
Back To Top
Brainstorm Software
210 S. Braddock Street
Winchester, VA 22601
540.665.4439
info@brainstormSoftware.com
|
|
